Home
Products
Active Air Commercial Humidifier 75 Pint

Overview of Active Air Commercial Humidifier 75 Pint

Active Air Commercial Humidifier 75 Pint

(2 customer review)

Plant photosynthesis slows in low humidity. The result is stress, poor growth, and lower productivity. Stop letting your plants suffer! Active Air Commercial Humidifier 75 Pint include straight water connections and fogging heads that point in multi-directions. This high-end humidifier's motor is industrial-grade.

Large reservoir but can also connect directly to your water supply (uses 1/4" tubing).
Ultra-Fine Mist - up to 75 pints per day for the AAHC75P.
Multi-directional fogging head.
Industrial-grade motor.
Coverage up to 320 sq. ft -AAHC75P.
Ideal for commercial grow space.
1 year warranty.

SKU : 638104024754

Availability: 100 in stock

Quantity

Accessories

BLACK TUBING 1/4IN OD 100FT

COMMERCIAL HUMIDIFIER 200 PINT

How to Use Active Air Commercial Humidifier 75 Pint:

Water Connection:

Place the unit on a level surface, such as a
benchtop or floor.

If your environment has little to no ventilation,
place the unit in a central location. In a ventilated
area, place unit near the intake end. When the
unit is in the desired location, connect a water
supply to the female 6mm inlet. Options:

• Plumb directly to a water supply
(6mm plastic tubing is preferred).
• Connect to a garden hose fitting.
• Plumb to a storage tank higher than the
fogging unit (gravity feed).

Power Connection:

Plug the unit directly into an electrical outlet
and listen for a smooth, quiet operation. Motor
shaft should be centered and vertical. Make any
necessary adjustments. After evaluation, connect
the unit to desired control device:

• Plug into a sensor for best automatic
control.
• Plug into a timer for specific automatic
control intervals.
• Plug directly to an electrical supply for
manual operation.

Maintenance:

Regularly clean the reservoir pan assembly with soap and water to remove dirt and sediment. If algae is present, sterilize affected parts with liquid bleach after cleaning. Periodically remove strainer screen and thoroughly flush. Check to make sure the tapered pump/fan blade assembly is free of debris. Once every three months, check unit for calcium buildup. If buildup deposits are present, disconnect the water and take the unit outside. Pour calcium-dissolving solvent (available in local hardware stores) in pan and operate unit outside to soften and remove the deposits. About once a year, remove the housing to check the SST atomizing screen to be sure the slots are clear of mineral buildup. To clean, scrub with a calcium-dissolving solvent.

WARNING: Designed for atomizing water only! Do not use flammable, toxic or corrosive liquids

SKU: 638104024754/Category : Grow Room Environment/ Tags :COMMERCIAL HUMIDIFIER 75 PINT